אינדקס
[You must be registered and logged in to see this link.]
(adapted from relooker's page on dgs forum)
When the bootloader is corrupted, and there is no way to boot the Relook/Mutant, a JTAG flash can bring your receiver back alive.
There is now a JTAG program from DGS that runs on a Windows PC.
Here's a description of how to use this program with a 200/300/400s
[You must be registered and logged in to see this link.]
Get the latest version of Jtag from the download section of the site and install it (eg in c/jtag).
Download: 'porttalk22.zip' from [You must be registered and logged in to see this link.].
From this package, copy 'AllowIo.exe' into 'c:\jtag' and 'porttalk.sys' into windows\system32\drivers'
[You must be registered and logged in to see this link.]
The pdf file that comes with the jtag program will give you all the settings, etc. Read it first!
For details of how to make your own jtag go to
[You must be registered and logged in to see this link.].
This will also give more detailed information of what is described here.
. To run the Jtag Program:
Double-click on 'porttalk.reg' to register porttalk.
Open an cmd Window (Startmenu, run... cmd [enter])
Go to folder 'c:\jtag' (cd c:\jtag)
On 400s Type: AllowIo.exe /a Jtag.exe -m Relook400s
On 300s Type: AllowIo.exe /a Jtag.exe -m relook300s
On 200s Type: AllowIo.exe /a Jtag.exe -m relook200s [You must be registered and logged in to see this link.]
After running jtag, you will get a message with ' == ' signs indicating the progress.
If it stops before reaching 100%, try playing with the delay settings or using a shorter cable. If you haven't quit your windows session and you want to try to flash again, just type: jtag.exe with all the switches. (You don't need to start portatalk because it is already running!) You can now reconnect your box and use usb or serial flash to upload a suitable bootloader (hold power button in on switch on for 400s to get usb upload). You can then flash your image [You must be registered and logged in to see this link.]
JTag How to on DG Station:
[You must be registered and logged in to see this link.]
This gives detailed information on running jtag as well as how to make your own jtag.
But, this link not working Portatalk program for win32 (windows 200, XP, etc)
[You must be registered and logged in to see this link.]
(adapted from relooker's page on dgs forum)
When the bootloader is corrupted, and there is no way to boot the Relook/Mutant, a JTAG flash can bring your receiver back alive.
There is now a JTAG program from DGS that runs on a Windows PC.
Here's a description of how to use this program with a 200/300/400s
[You must be registered and logged in to see this link.]
Get the latest version of Jtag from the download section of the site and install it (eg in c/jtag).
Download: 'porttalk22.zip' from [You must be registered and logged in to see this link.].
From this package, copy 'AllowIo.exe' into 'c:\jtag' and 'porttalk.sys' into windows\system32\drivers'
[You must be registered and logged in to see this link.]
The pdf file that comes with the jtag program will give you all the settings, etc. Read it first!
For details of how to make your own jtag go to
[You must be registered and logged in to see this link.].
This will also give more detailed information of what is described here.
. To run the Jtag Program:
Double-click on 'porttalk.reg' to register porttalk.
Open an cmd Window (Startmenu, run... cmd [enter])
Go to folder 'c:\jtag' (cd c:\jtag)
On 400s Type: AllowIo.exe /a Jtag.exe -m Relook400s
On 300s Type: AllowIo.exe /a Jtag.exe -m relook300s
On 200s Type: AllowIo.exe /a Jtag.exe -m relook200s [You must be registered and logged in to see this link.]
After running jtag, you will get a message with ' == ' signs indicating the progress.
If it stops before reaching 100%, try playing with the delay settings or using a shorter cable. If you haven't quit your windows session and you want to try to flash again, just type: jtag.exe with all the switches. (You don't need to start portatalk because it is already running!) You can now reconnect your box and use usb or serial flash to upload a suitable bootloader (hold power button in on switch on for 400s to get usb upload). You can then flash your image [You must be registered and logged in to see this link.]
JTag How to on DG Station:
[You must be registered and logged in to see this link.]
This gives detailed information on running jtag as well as how to make your own jtag.
But, this link not working Portatalk program for win32 (windows 200, XP, etc)
[You must be registered and logged in to see this link.]
