אינדקס
DM800SE סיני : TUNER 3-IN-1, 3 טיונרים באחד C/T/S2
EW ! Sunray4 DM800 se SR4 triple tunner with wifi ,s/c/t in one, all working now
item#: 800se triple[You must be registered and logged in to see this image.]
NEW ! Sunray4 DM800 se SR4 triple tunner ,s/c/t in one
Tuner:Three-in-One S/C/T, Tuner can be used at the same time.
SSL84 gemini5.1 sim 2.10
The satellite / cable / Terrestrial funciton all work now
build in 300Mbps wireless Lan
Powerful receiver for digital TV and Radio programs.
Quality warrenty 1 year warrenty.
*shipping Declaration for custom: We will declare as "Sample" or "gift" with *other name with low value to help the buyer to avoid tax, if you have any special requirement, pls tell us.
How to use C and T Tuners
Cable Tunner Scanning setup config
1.The screen will only show up as a single S Tuner at the moment, but it does not stop you using each tuner format though S,C ot T.
2. You can also scan on any image you don't need anything special tested on Sunray & Nemesis images.
3. Before you start to scan for C channels you'll need to find out the Channel Frequencies and Symbol rate for your Country/Area.
Once you have that you can start to set up the tuner configuration.
On your remote Menu-Setup-Service Searching-Tuner Config
1. Setup the tuner as per the screen shot.
On the pic you'll see it says C at the Satellite position that's because i did my own edit on the satellite.xml with my area details but as we are manually scanning just select any Satellite position it does not matter.
2. Now exit the tuner config and select the manual scan option and set up as per the pic.
Now repeat for all your other frequencies.
Ive not tried a automatic scan but i guess you could if you prepare the satellite.xml with all your frequency details to scan with.
Package with:
1pcs sunray 800se (with triple tuner) box
1pcs hdmi-hdmi cable
1pcs remoter controller
1pcs power supply 3A (EU/US/AU plug)
1pcs av cable
1pcs scart covert
The main thing you have to remember here is the frequencies you enter needs to have a 01 in front of it. So if a frequency for your area is 643.000 you loose the 000 from the end and put a 01 in front of the 643 so you end up with 01634 in the frequency entry. For the symbol rate you need in most cases a zero in front so 6667 will be entered as 06667.
Once thats setup up with those parameters press OK to scan
EW ! Sunray4 DM800 se SR4 triple tunner with wifi ,s/c/t in one, all working now
item#: 800se triple[You must be registered and logged in to see this image.]
NEW ! Sunray4 DM800 se SR4 triple tunner ,s/c/t in one
Tuner:Three-in-One S/C/T, Tuner can be used at the same time.
SSL84 gemini5.1 sim 2.10
The satellite / cable / Terrestrial funciton all work now
build in 300Mbps wireless Lan
Powerful receiver for digital TV and Radio programs.
Quality warrenty 1 year warrenty.
*shipping Declaration for custom: We will declare as "Sample" or "gift" with *other name with low value to help the buyer to avoid tax, if you have any special requirement, pls tell us.
How to use C and T Tuners
Cable Tunner Scanning setup config
1.The screen will only show up as a single S Tuner at the moment, but it does not stop you using each tuner format though S,C ot T.
2. You can also scan on any image you don't need anything special tested on Sunray & Nemesis images.
3. Before you start to scan for C channels you'll need to find out the Channel Frequencies and Symbol rate for your Country/Area.
Once you have that you can start to set up the tuner configuration.
On your remote Menu-Setup-Service Searching-Tuner Config
1. Setup the tuner as per the screen shot.
On the pic you'll see it says C at the Satellite position that's because i did my own edit on the satellite.xml with my area details but as we are manually scanning just select any Satellite position it does not matter.
2. Now exit the tuner config and select the manual scan option and set up as per the pic.
Now repeat for all your other frequencies.
Ive not tried a automatic scan but i guess you could if you prepare the satellite.xml with all your frequency details to scan with.
Package with:
1pcs sunray 800se (with triple tuner) box
1pcs hdmi-hdmi cable
1pcs remoter controller
1pcs power supply 3A (EU/US/AU plug)
1pcs av cable
1pcs scart covert
The main thing you have to remember here is the frequencies you enter needs to have a 01 in front of it. So if a frequency for your area is 643.000 you loose the 000 from the end and put a 01 in front of the 643 so you end up with 01634 in the frequency entry. For the symbol rate you need in most cases a zero in front so 6667 will be entered as 06667.
Once thats setup up with those parameters press OK to scan
