אינדקס
המדריך באנגלית
little manual to install motor on ipbox 91hd - WITHOUT USALS ONLY DISEQC
SETUP
ipbox 91hd - fw vizyon 0.6.0
motor moteck 2100sg
I start from the hypotese to have already settled up motor (hardware) and loaded a good channel list for motor
now i have my motor on my reference sat (perfect south) for me is as example hotbird 13east
ok i go to menu menu->configuration (setup)-> channel search->tuner setup
now i start to search with rc left and right arrow my reference sat
set lnb1
diseqc 1.2
go with remote till usals and set NO
set number of memory of my first sat (for me n. 1) IT'S IMPORTANT TO REMEMBER THIS SO IT'S BETTER TO WRITE IT
ok and it's again in tuner windows
esc
go to motor setup
vado su imposta motore
red button (sintonize) and set a good tp of my sat (hotbird in the example)
ok
now i must have BER more or less zero
if it's so memorise with green button settin number of sat (as above VERY IMPORTANT SAME NUMBER)
in this moment i must read nolock (or something like this)
if everythin it's ok i have memorised first sat
esc till have tuner setup
fino a tornare alla impostazione tuner
enter and select with rc left and right arrow a sat near first one (i.e. 16est)
entro seleziono con tasto dx o sx il sat più vicino (ad es. 16est)
set lnb1 (same as above)
seleziono lnb 1 (Lo stesso di prima)
diseqc 1.2
go till the end of "page"
vado in fondo alla schermata
USALS NO
set number of memory of my first sat (for me n. 2) IT'S IMPORTANT TO REMEMBER THIS SO IT'S BETTER TO WRITE IT
imposto il numero per la memorizzazione (ad es. 2)
ok and i see tuner setup
esc make second time motor setup
red button (sintonize) and set a good tp of second sat (16east with favorable footprint in the example)
ok
ATTENTION MOTOR MAY START TO MOVE (I DON'T KNOW WHY AND NOT FOR ANY SAT)
in lower of page there must be setuo of tp of second sat
see the antenna if it hasn't moved go to move motor and search at east (i go to 13 east to 16 east)
in few moment motor start to move and will find tp (BER VERY LOW OR ZERO)
refine position with precision movement (step movement)
store position 2 (as in set up of satellite)
esc till chose to return to previous channel press ok and motor must return to 13 east
press ok select satellite,chose 16 east chose a good channel and motor must goto new sat
repeat procedure for every sat at east return to hotbird and start with west
IMPORTANT
1. SET SATELLITE NUMBER AND STORE SAT ON THE SAME NUMBER (IF ASTRA 19 EAST IS SET AS 3 WHEN I STORE POSITION AFTER FOUND SAT WITH MOTOR CHOOSE 3)
2. LINGSAT FOR FREQUENCES AND FOOTPRINTS
3. CONTROL WITH EYES MOTOR (I OBLIGED MY SON TO CHECK ANTENNA IN EVERY MOMENT
little manual to install motor on ipbox 91hd - WITHOUT USALS ONLY DISEQC
SETUP
ipbox 91hd - fw vizyon 0.6.0
motor moteck 2100sg
I start from the hypotese to have already settled up motor (hardware) and loaded a good channel list for motor
now i have my motor on my reference sat (perfect south) for me is as example hotbird 13east
ok i go to menu menu->configuration (setup)-> channel search->tuner setup
now i start to search with rc left and right arrow my reference sat
set lnb1
diseqc 1.2
go with remote till usals and set NO
set number of memory of my first sat (for me n. 1) IT'S IMPORTANT TO REMEMBER THIS SO IT'S BETTER TO WRITE IT
ok and it's again in tuner windows
esc
go to motor setup
vado su imposta motore
red button (sintonize) and set a good tp of my sat (hotbird in the example)
ok
now i must have BER more or less zero
if it's so memorise with green button settin number of sat (as above VERY IMPORTANT SAME NUMBER)
in this moment i must read nolock (or something like this)
if everythin it's ok i have memorised first sat
esc till have tuner setup
fino a tornare alla impostazione tuner
enter and select with rc left and right arrow a sat near first one (i.e. 16est)
entro seleziono con tasto dx o sx il sat più vicino (ad es. 16est)
set lnb1 (same as above)
seleziono lnb 1 (Lo stesso di prima)
diseqc 1.2
go till the end of "page"
vado in fondo alla schermata
USALS NO
set number of memory of my first sat (for me n. 2) IT'S IMPORTANT TO REMEMBER THIS SO IT'S BETTER TO WRITE IT
imposto il numero per la memorizzazione (ad es. 2)
ok and i see tuner setup
esc make second time motor setup
red button (sintonize) and set a good tp of second sat (16east with favorable footprint in the example)
ok
ATTENTION MOTOR MAY START TO MOVE (I DON'T KNOW WHY AND NOT FOR ANY SAT)
in lower of page there must be setuo of tp of second sat
see the antenna if it hasn't moved go to move motor and search at east (i go to 13 east to 16 east)
in few moment motor start to move and will find tp (BER VERY LOW OR ZERO)
refine position with precision movement (step movement)
store position 2 (as in set up of satellite)
esc till chose to return to previous channel press ok and motor must return to 13 east
press ok select satellite,chose 16 east chose a good channel and motor must goto new sat
repeat procedure for every sat at east return to hotbird and start with west
IMPORTANT
1. SET SATELLITE NUMBER AND STORE SAT ON THE SAME NUMBER (IF ASTRA 19 EAST IS SET AS 3 WHEN I STORE POSITION AFTER FOUND SAT WITH MOTOR CHOOSE 3)
2. LINGSAT FOR FREQUENCES AND FOOTPRINTS
3. CONTROL WITH EYES MOTOR (I OBLIGED MY SON TO CHECK ANTENNA IN EVERY MOMENT
