אינדקס
First I used the ABcom ipbox 900hd with SifTeam r8728 which I have done it with the pen stick using Uboot 1.3.3.
1- Your device should be powered on and connected to the internet through the Ethernet connection at the back.
2- You click the RED button on the Remote control once
3- Then click the RED button again on the Remote control
4- Click the BLUE button (online) and wait until "Sif install online-loading" is finished
5- Choose CAM_incubusCamd-0.50.online
6- Install it and wait until "Package:CAM_incubusCamd-0.50: installed
7- Then with an FTP prog connect to your receiver in my case I choose DCC.
8- Enter the path var/bin
9- You will find a file named incubusCamd.conf
10- Right click the file and edit it
11- Scroll down to the [Prov:FF00] section
12- You will find this line
Card_server_url_0=cccam://:@:
13- enter your data and don't write < > I mean write it in this form Card_server_url_0ccam://username
assword@hostnameort
14- scroll down to the [Servers] section
15- you will find the same line edit it the same way
16- save your file after you finish
17- copy the incubusCamd.conf, and incubusCamd.prio and past them in ./etc and also in var/keys
18- Exit every thing and click the RED button.
19- click the BLUE button " SETCAM"
20- Click start cam.
and this is every thing i know hope it works with you all i've written it in details as much as i can, if there is any question feel free
1- Your device should be powered on and connected to the internet through the Ethernet connection at the back.
2- You click the RED button on the Remote control once
3- Then click the RED button again on the Remote control
4- Click the BLUE button (online) and wait until "Sif install online-loading" is finished
5- Choose CAM_incubusCamd-0.50.online
6- Install it and wait until "Package:CAM_incubusCamd-0.50: installed
7- Then with an FTP prog connect to your receiver in my case I choose DCC.
8- Enter the path var/bin
9- You will find a file named incubusCamd.conf
10- Right click the file and edit it
11- Scroll down to the [Prov:FF00] section
12- You will find this line
Card_server_url_0=cccam://
13- enter your data and don't write < > I mean write it in this form Card_server_url_0ccam://username
assword@hostnameort14- scroll down to the [Servers] section
15- you will find the same line edit it the same way
16- save your file after you finish
17- copy the incubusCamd.conf, and incubusCamd.prio and past them in ./etc and also in var/keys
18- Exit every thing and click the RED button.
19- click the BLUE button " SETCAM"
20- Click start cam.
and this is every thing i know hope it works with you all i've written it in details as much as i can, if there is any question feel free
