אינדקס
HowTo use the DGS JTAG flash utility.
(adapted from relooker's page on dgs forum)
When the bootloader is corrupted, and there is no way to boot the Relook/Mutant, a JTAG flash can bring your receiver back alive.
There is now a JTAG program from DGS that runs on a Windows PC.
Here's a description of how to use this program with a 200/300/400s
1. Get the required files:
Get the latest version of Jtag from the download section of the site and install it (eg in c/jtag).
Download: 'porttalk22.zip' from http://www.beyondlogic.org.
From this package, copy 'AllowIo.exe' into 'c:\jtag' and 'porttalk.sys' into windows\system32\drivers'
2. Connect jtag to parallel port of pc
The pdf file that comes with the jtag program will give you all the settings, etc. Read it first!
For details of how to make your own jtag go to
http://dev.dgstation.co.kr/phpBB2/viewtopic.php?t=27&postdays=0&postorder=asc&start=0.
This will also give more detailed information of what is described here.
. To run the Jtag Program:
Double-click on 'porttalk.reg' to register porttalk.
Open an cmd Window (Startmenu, run... cmd [enter])
Go to folder 'c:\jtag' (cd c:\jtag)
On 400s Type: AllowIo.exe /a Jtag.exe -m Relook400s
On 300s Type: AllowIo.exe /a Jtag.exe -m relook300s
On 200s Type: AllowIo.exe /a Jtag.exe -m relook200s 4. If all goes well
After running jtag, you will get a message with ' == ' signs indicating the progress.
If it stops before reaching 100%, try playing with the delay settings or using a shorter cable. If you haven't quit your windows session and you want to try to flash again, just type: jtag.exe with all the switches. (You don't need to start portatalk because it is already running!) You can now reconnect your box and use usb or serial flash to upload a suitable bootloader (hold power button in on switch on for 400s to get usb upload). You can then flash your image 5. References
JTag How to on DG Station:
http://dev.dgstation.co.kr/phpBB2/viewtopic.php?t=27&postdays=0&postorder=asc&start=0
This gives detailed information on running jtag as well as how to make your own jtag.
But, this link not working Portatalk program for win32 (windows 200, XP, etc)
http://www.beyondlogic.org
(adapted from relooker's page on dgs forum)
When the bootloader is corrupted, and there is no way to boot the Relook/Mutant, a JTAG flash can bring your receiver back alive.
There is now a JTAG program from DGS that runs on a Windows PC.
Here's a description of how to use this program with a 200/300/400s
1. Get the required files:
Get the latest version of Jtag from the download section of the site and install it (eg in c/jtag).
Download: 'porttalk22.zip' from http://www.beyondlogic.org.
From this package, copy 'AllowIo.exe' into 'c:\jtag' and 'porttalk.sys' into windows\system32\drivers'
2. Connect jtag to parallel port of pc
The pdf file that comes with the jtag program will give you all the settings, etc. Read it first!
For details of how to make your own jtag go to
http://dev.dgstation.co.kr/phpBB2/viewtopic.php?t=27&postdays=0&postorder=asc&start=0.
This will also give more detailed information of what is described here.
. To run the Jtag Program:
Double-click on 'porttalk.reg' to register porttalk.
Open an cmd Window (Startmenu, run... cmd [enter])
Go to folder 'c:\jtag' (cd c:\jtag)
On 400s Type: AllowIo.exe /a Jtag.exe -m Relook400s
On 300s Type: AllowIo.exe /a Jtag.exe -m relook300s
On 200s Type: AllowIo.exe /a Jtag.exe -m relook200s 4. If all goes well
After running jtag, you will get a message with ' == ' signs indicating the progress.
If it stops before reaching 100%, try playing with the delay settings or using a shorter cable. If you haven't quit your windows session and you want to try to flash again, just type: jtag.exe with all the switches. (You don't need to start portatalk because it is already running!) You can now reconnect your box and use usb or serial flash to upload a suitable bootloader (hold power button in on switch on for 400s to get usb upload). You can then flash your image 5. References
JTag How to on DG Station:
http://dev.dgstation.co.kr/phpBB2/viewtopic.php?t=27&postdays=0&postorder=asc&start=0
This gives detailed information on running jtag as well as how to make your own jtag.
But, this link not working Portatalk program for win32 (windows 200, XP, etc)
http://www.beyondlogic.org
