אינדקס
How to flash an image
There are two ways to flash an image.
-Via Flashtools (all available images)
-Via PC-editor (not all available images)
You can flash almost any image with PC-editor EXCEPT the images which contain a bootloader.
Such images are: *_all.img and uboot.img.
These images must be flashed with Flashtools
As most Enigma images are *.all images they must be flashed by Flashtools
If your image is a bin file?
Just select image type and select "all files" in flashtools, so you can flash the box with a bin file.
It can also be done by the following procedure
For a complete overview of image formats see:
http://www.denktenk.com/old/images_explained.htm
There are two ways to flash an image.
-Via Flashtools (all available images)
-Via PC-editor (not all available images)
You can flash almost any image with PC-editor EXCEPT the images which contain a bootloader.
Such images are: *_all.img and uboot.img.
These images must be flashed with Flashtools
As most Enigma images are *.all images they must be flashed by Flashtools
If your image is a bin file?
Just select image type and select "all files" in flashtools, so you can flash the box with a bin file.
It can also be done by the following procedure
- Upload the image file to the media folder in your receiver,
- Use the webif in PCEditor or use the webif of the receiver from your PC (Use internet explorer visit your box),
- Select the flash option (image file) from the location you just uploaded,
- The receiver will restart, DO NOT do anything, Do not cut power until the DONE message is displayed.
- Reboot the box.The First Booting may take more than 10 minutes.
For a complete overview of image formats see:
http://www.denktenk.com/old/images_explained.htm
